Understanding Road Treatments
Definitions of Road Treatments
- Crack Seal: Proactive activity to delay further damage to the driving surface. Streets form cracks in the driving surface with age that allow moisture to enter the subsurface which accelerate deterioration. Cracks with one-eighth-inch separation are filled with a bitumastic sealant.
- Micro-surfacing: The application of water, asphalt emulsion, aggregate (small crushed rock), and chemical additives to existing asphalt pavement surface. Micro-surfacing is applied in order to help preserve and protect the underlying pavement structure and provide a new driving surface.
- Dig out and Replace: The replacement of the driving surface and subgrade to an area of the street with severely compromised asphalt and subgrade. These areas must be dug out and replaced before improvements to the driving surface are made.
- Pavement Reconstruction: The entire pavement structural section, asphalt and sub-base, is removed and replaced.
- Pavement Rehabilitation: The old surface is milled or ground off, minor structural deficiencies are repaired, and a new surface is applied.
Methodology on Selecting Roads for M&R Projects
When selecting street segments for these projects, staff selects street segments that minimize disruption to residents, avoid conflicts with other upcoming City roadway and utility projects, and are located near other project locations to minimize mobilization and travel time for contractors. In future projects, staff will select streets in other parts of the City to ensure equity. While planning for these projects, road maintenance also includes road striping, sidewalk repair, installing accessibility ramps, stormwater drains, bike lanes and more. As is typical of paving projects, construction will cause delays to traffic in the work areas; however, staff ensures the impacts are minimized and that public safety is held as the highest priority.
